Configuration 3D Systems Touch Smart Haptic Device

Modified on Thu, 17 Aug 2023 at 09:50 PM


What's included

  • 3D Systems Haptic Device
  • USB Type A to Type B Cable: This cable is used to connect the haptic device to the USB 2.0 or 3.0 port on the computer.
  • Universal Power Supply: The power supply can be used on any standard circuit, using the supplied power cord.
  • Power Cord: The power cord connects the Universal Power Supply to the wall outlet.

Setup the Touch Smart Haptic Device

Before using the 3D Systems Haptic Devices, they must be paired with the ‘Touch Smart Setup’ Software. The app downloads automatically on your laptop as part of the Fundamental Surgery installer. To setup the haptic arms follow the below steps.

  1. Locate and double click the 'Touch Smart Setup' app on the desktop
  2. Before choosing the devices from the left panel, the user needs to confirm the number of haptic devices used under 'Configuration Mode' in the center of the screen.
  3. Follow the on-screen instructions, select your left hand device first. The associated serial number on screen can be found underneath each physical device.
  4. Now confirm calibration by selecting ‘Save Configuration’.
  5. Should you encounter any issues, disconnect/reconnect wires and select ‘rescan’ in the application. A full system restart may also help.

Watch a video of the setup here

3D Systems Customer Support Center

Latest Haptic Device Driver

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article